This is the video shows all textures of the whole structure.
This is the video shows the whole design and sections of the model.
This is the video shows the sections of model.
This is the video shows the sections of model.
Monday 31 March 2014
Experiment one submission: Sketchup Model
The 2D section:
The drawing section is for clients of Revival Cycles and Steinway & Sons. The above one is for Revival that each part of motorcycle is connected together by lines. The below one is for the piano that the keys of piano are moving when people play the piano. And also the keys have black and white colours.
After drawing, I had to find a way to make line become structure. Learning from Peter Eisenmann, I can seperate the whole space to different parts. Some have connection and some are seperated.
For below, because of the connection of above, I make the independent space for room as it should have difference.
The drafted model 1:
At first, I did not choose the drawing above. But when I make the model of drawing, I found the drawing is more like pattern, not an architecture.
The drafted model 2:
This drafted model is made depending on the top section. However, it is quite a mass and no show room. There is no distinction between the above one and below one.
The drafted model 3:
This model is developing a lot, but use the different shape to put together. Especially the below ground, it is not suit for the reqirement of Steinway & Sons.
The final model:
This is the view of the whole structure. The three parts of model, above ground, showroom and below ground.
This is above ground.
These two show the showroom.
This is the below ground.
The final model have some difference from the drawing, but actually, the rooms on ground and above ground almost connected together, and the three rooms below the ground are seperated. The model has the same idea with the drawing.
After drawing, I had to find a way to make line become structure. Learning from Peter Eisenmann, I can seperate the whole space to different parts. Some have connection and some are seperated.
For below, because of the connection of above, I make the independent space for room as it should have difference.
The drafted model 1:
At first, I did not choose the drawing above. But when I make the model of drawing, I found the drawing is more like pattern, not an architecture.
The drafted model 2:
This drafted model is made depending on the top section. However, it is quite a mass and no show room. There is no distinction between the above one and below one.
The drafted model 3:
The final model:
 |
This is the view of the whole structure. The three parts of model, above ground, showroom and below ground.
This is above ground.
These two show the showroom.
This is the below ground.The final model have some difference from the drawing, but actually, the rooms on ground and above ground almost connected together, and the three rooms below the ground are seperated. The model has the same idea with the drawing.
Experiment one submission: Textures and Stairs
Textures:
Organic
Lumpy
Airy
Wrinkly
Stairs Sections:
On ground to above ground:
It uses the triangle to support the structure.
Above ground to below ground:
The steps move up following the curve. The steel is used to connect the stairs and pillar. In the building, using double glass wall to protect the people as the height of stairs is quite high.
This stair uses the material of concrete. It is compact stairs, also a kind of decoration of the room.
Below ground:
This stair uses the materials of glass, marble and steel.
Glass to connect the steel handrail and stairs.
The design of the half landing stairs can use the space reasonable.
Sunday 30 March 2014
Subscribe to:
Posts (Atom)